Roller Shutter Doors Prices in Cape Town
This page explains what a roller shutter door actually costs in Cape Town and why quotes differ. If you want our rates set out door type by door type, go to the roller shutter doors price list instead. Read this one to understand what you are paying for before you compare three quotes that look nothing like each other.
Roller shutter door quotes in Cape Town vary far more than people expect, and the cheapest number on the page is very often the most expensive door over five years. The gap is almost never profiteering — it is specification. A quote built on a lighter slat gauge and shallower guide rails is a genuinely different product from one that is not, and nothing on either quote will say so unless you ask.
This page sets out what actually moves the price, so you can read a quote for what it is. For our rates set out door type by door type, see the roller shutter doors price list.
Updated Roller Shutter Doors Prices (Cape Town)
Below is the 2026 pricing guide for roller shutter doors across Cape Town, including supply and installation.
Roller Shutter Door Price List
| Type | Estimated Price |
|---|---|
| Manual Steel Shutter | R10,000 – R45,000 |
| Motorised Steel Shutter | R8,500 – R22,000 |
| Aluminium Roller Shutter | R5,500 – R18,000 |
| Perforated Roller Shutter Doors | R15,000 – R45,000 |
| Heavy-Duty Industrial Shutters | R10,000 – R50,000 |
| Galvanized Roller Shutter Door | R10,000 – R45,000 |
| Powder-Coated Roller Shutter Door | R8,000 – R35,000 |
| Roller Shutter Door Repairs | R3,500 – R15,000 |
These roller shutter doors prices include typical installation costs. Final pricing depends on height, width, material thickness, motor type and whether the door is indoors or exposed to weather.
What Affects Roller Shutter Doors Prices?
1. Size of the opening. Cost rises faster than area. A wider span needs a heavier curtain to resist deflection, which needs a larger barrel and stronger fixings, which often needs a bigger drive. One extra metre of width can change three other line items.
2. Slat gauge and profile. The main difference between two quotes that look alike. Heavier gauge costs more up front and is the difference between a door that shrugs off a knock and one that deforms.
3. Finish. Untreated steel is cheapest and, near the coast, the shortest-lived. Galvanized costs more; powder-coated more again, and buys you colour on top of the protection.
4. Manual or motorised. A motor adds cost, and the right motor for the curtain weight adds more than the wrong one. Undersized motors are the cheapest way to make a door fail early.
5. The opening you already have. Out-of-square openings, low lintels, uneven floors and side room lost to a boundary wall all add labour. This is why we measure before quoting rather than after.
6. Access. A ground-floor unit with parking outside costs less to fit than a shopfront on a busy road with a timed loading bay.
How to Compare Three Roller Shutter Door Quotes
Put the three quotes side by side and check the same five things on each. If a quote does not state them, that is itself the answer.
Is the slat gauge and profile stated? If not, you are comparing a price to a price, not a door to a door.
Is the guide rail depth stated? Shallow guides are where money is quietly saved and callouts are quietly created.
Was the opening measured on site, or taken over the phone? A quote against an unmeasured opening will move.
What is excluded? Electrical supply to the motor position, structural alterations and removal of the old door are the usual three.
Who fits it? Subcontracted installation is where specification drifts between the quote and the door on the wall.
What Our Quoted Price Includes
So that you can compare fairly, here is what sits inside a price we quote: the site measure, manufacture to your measured opening, delivery, installation by our own team, and commissioning of the drive against the actual curtain weight.
Quoted as separate lines where they apply: electrical supply run to the motor position, structural alteration to the opening, and removal and disposal of an existing door. We flag which of these apply at quote stage, not on installation day.
After the fit, servicing and repairs are available on anything we supply, with 24/7 emergency callout for doors that fail out of hours.
FAQ – Roller Shutter Doors Prices
1. What is the cheapest roller shutter door?
2. Are motorised roller shutter doors much more expensive?
3. Do prices include installation?
4. Do industrial shutters cost more?
5. How long do roller shutter doors last?
Get a Free Quote Today
Do You Need A Roller Door?
Get A Free Quote
Why Cape Town Businesses Choose Us
City Bowl & Atlantic Seaboard
Sea Point, Green Point, Camps Bay, Woodstock, Salt River, Observatory, Maitland.
Southern Suburbs
Claremont, Rondebosch, Kenilworth, Newlands, Mowbray, Wynberg, Plumstead, Constantia, Bergvliet, Diep River, Retreat, Muizenberg.
Northern Suburbs
Bellville, Parow, Goodwood, Milnerton, Edgemead, Brackenfell, Kuils River, Durbanville, Table View.
Cape Flats & South East
Mitchells Plain, Athlone, Gatesville, Ottery, Grassy Park, Epping, Pinelands.